Home > MADRIX® > MADRIX® Hardware
The MADRIX® NEBULA is a flexible interface to directly control a wide range of digital LEDs.
EAN: 4260263421189Part Number: IA-HARD-001018Brand: MADRIX®
The MADRIX® NEBULA is a flexible LED pixel tape driver to directly control a wide range of digital LEDs.Made in Germany.
The MADRIX® NEBULA directly connects to your LED pixels. This advanced SPI decoder receives control data over USB or Art-Net over Ethernet network and is built to provide excellent image quality.Direct ConnectionDirectly connect to a wide range of supported LEDs via two 4-pin screw terminals. A signal frequency of up to 24 MHz is available. Supply power over USB of 5V to 24V over a 2-pin screw terminal.
Quality Output Of 8 UniversesEach device drives up to 1,360 RGB pixels while ensuring responsive delivery of high-quality signals to each individual LED. You can choose the output protocol separately for each of the two ports.
MADRIX® Sync ModeSimply use several units at the same time for larger projects. Only MADRIX® software and hardware allow you to fully synchronize Art-Net data for all ports and across multiple devices to get an optimal image on the LEDs without visual interruptions.
SPI ConverterArt-Net is directly converted to SPI without the need for an additional interface. Reliably distribute data from any compatible software of hardware controller. Use USB or Art-Net for all the great features of the MADRIX® software.Supported LEDs
As of May 2017. Additional LED types will be supported with future firmware updates.
Designed for DIN Rails Or WallsIts non-conductive enclosure and standardized design for 35mm top-hat rails make mounting quick, easy, and safe. 2 extra brackets are provided for optional wall mounting. 4 indicators quickly show the device status with the option to turn them off.Invaluable FeaturesThe device is ready within seconds after startup. HTP Merging is automatically available for two Art-Net sources. You can change specific device settings using the built-in web configuration tool.
Documentation:Please use help.madrix.com for user manuals and quick start guides/technical manuals.
MADRIX® NEBULA is a hardware interface to control your digital LED strips, LED stripes, and LED tape It is an advanced SPI converter and LED pixel tape driver Supports a wide range of LEDs: APA101, APA102, APA104, APA106, GW6201, LPD6803, LPD8806, MBI6120, P9883, SK6812, SK6822, SM16703, SM16716, TLS3001, TLS3008, TM1804, TM1809, TM1812, TM1814, TM1829, UCS1903, UCS512B3, WS2801, WS2803, WS2811, WS2811S, WS2812, WS2812B, WS2813, WS2818, WS2822S, WS2822S Addressing (As of May 2017) Additional LED types will be supported with future firmware updates Drives up to 1360 RGB pixels (8 DMX universes / 4096 DMX Channels / 4096 single-color pixels / 1024 RGBW pixels) distributed equally over 2 ports Supports a signal frequency of up to 24 MHz The output protocol can be set separately for each of the 2 ports Directly connects to the LEDs via 4-pin screw terminals Provides flexible power options: over USB (5 V) or via screw terminal (5 V to 24 V / 12 A) as well as routing through to LEDs with up to 6 A maximum load per port with various options on how to connect LEDs, power, and MADRIX® NEBULA Receives data over Ethernet network (Art-Net) Can also be used as MADRIX® USB interface Works great with the MADRIX® Software with quick and easy installation (sold separately) Sync Mode: MADRIX Software and hardware allow you to synchronize Art-Net data for all output ports and even across multiple devices to get an optimal image on the LEDs without visual interruptions Complies with the official Art-Net specifications and can be used as regular Art-Net unit with other consoles, controllers, or software solutions Automatic HTP merging for two Art-Net sources 6 status LEDs, which can be turned off Built-in web tool for on-device configuration Can be mounted on 35-mm DIN rails or walls via the provided wall-mount brackets Non-conductive enclosure with IP20 and UL94 V-O flammability rating Fanless, low-energy design Ready within seconds after startup Recommended for any small or large installation Multiple devices can be used together without problems The firmware is upgradable for future features Installation instructions and MADRIX® Software available in English, German, Spanish, French, and Simplified Chinese Software user manual available in English Quick start guide / technical manual available in English and German Made in Germany User manuals also available at help.madrix.com Free software demo version and more information available at www.madrix.com MADRIX® 3.X minimum system requirements: 2.0 GHz dual-core CPU, OpenGL 2.1 graphics card (NVIDIA recommended), 2 GB RAM, 1 GB free harddisk space, 1280 x 768 screen resolution, network card, sound card, USB 2.0MADRIX® 3.X supported operating systems: Microsoft Windows 7 | 8 | 8.1 | 10 (compatible with 32 bit and 64 bit)
MADRIX® NEBULA is a hardware interface to control your digital LED strips, LED stripes, and LED tape
MADRIX® 3.X minimum system requirements:
MADRIX® 3.X supported operating systems:
Please contact us for further informations.
Be the first to Write a Review for this item!
Customers who bought this item also bought:
MADRIX® KEY basic V3.X£1,092.00
Output for 16 x 512 DMX channels.
MADRIX® KEY start V3.X£276.00 £248.40
Output for 1 x 512 DMX channels.
MADRIX® KEY ultimate V3.X£4,380.00
Output for 256 x 512 DMX channels.
MADRIX® KEY entry V3.X£546.00
Output for 4 x 512 DMX channels.
MADRIX® KEY professional V3.X£2,190.00
Output for 64 x 512 DMX channels.